CLEVELAND - High radiation levels recorded at a nuclear reactor in northeast Ohio have prompted a special inspection by the US Nuclear Regulatory Commission.

Workers at the Perry Nuclear Power Plant immediately evacuated it on April 22 when radiation levels rose while it was shutting down for a refueling outage, the commission said Tuesday. Plant officials don't believe workers were exposed to radiation levels "in excess of NRC limits," the commission said.

Related readings:  No obvious change detected in radiation levels in China  Radiation near Japan reactors too high for crews  Radiation leakage in Japan may exceed Chernobyl

"The plant is in a safe condition and there has been no impact to workers at the plant or members of the public from this issue," the commission said in a statement.

Radiation levels rose while workers were removing a monitor that measures nuclear reactions during start-up, low-power operations and shutdown, the commission said.

The highest radiation exposure to any of the workers was 98 millirems, which is equivalent to two or three chest X-rays, a spokesman for the plant's owner said. The NRC's limit for radiation exposure in a year is 5,000 millirems, he said.

The commission, which began inspecting the plant on Monday, did not say how high the radiation levels were or how often such inspections occur.

The nuclear plant, owned by Akron-based FirstEnergy Corp., is about 35 miles (56 kilometers) northeast of Cleveland and began operating in 1987. FirstEnergy spokesman Todd Schneider said the four workers involved were contractors hired to assist with the plant refueling. He said the contractors were working in a containment building underneath the reactor at the time.

"The contractors did not use the proper method to remove this piece of equipment from underneath the reactor," Schneider said.

The plant refueling has continued on schedule, Schneider said.

"It shouldn't have happened, but the bottom line was it did not impact the safety or health of the contractors or the public," he said.

In March 2010, a small fire broke out in a water pump's lubrication system at the plant. The fire burned for several hours, and two members of the plant's fire brigade were taken to a hospital for heat stress.

The plant experienced numerous safety problems several years ago, causing the NRC to monitor its safety operations every three months in 2005, when the plant was forced to shut down briefly because of problems with pumps that circulate coolant through the reactor's core.